PNEUFLEX 1/2" O.D Tubing, 1/2 NPT Thread Male Tee Branch Stainless Steel Push in Fitting 1/2 inch O.D Tubing, 1/2 NPT Male Tee Branch Stainless Steel Push in Fitting Pneuflex SPB 1/2-N04 male tee branch stainless steel push in fitting (stainless steel push to connec.. Product #: SPB 1/2-N04 SPB 1/2-N04 5 based on 0 reviews

SPB 1/2-N04, 1/2" O.D Tubing, 1/2 NPT Thread Male Tee Branch Stainless Steel Push in Fitting

Pneuflex SPB 1/2-N04 male tee branch stainless steel push in fitting (stainless steel push to connect fitting) is T configuration, and has two 1/2" tubing connections on the main run and a male 1/2 NPT thread on the branch at a 90-degree angle from the middle of the tee. The body of male tee branch stainless steel push in fitting can be rotated after installation. 1/2" x 1/2 NPT male tee branch stainless steel push in fitting is made of 316 stainless steel for corrosion and abrasion resistance, FKM seal material for chemical-resistance. 1/2" O.D tubing, 1/2 NPT thread male branch tee stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature, food and wash-down applications. External tightening with a flat wrench.

Part #: SPB 1/2-N04
Push-in Tubing O.D: 1/2"
Thread Size: 1/2 NPT
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPB 1/2-N04, 1/2" O.D Tubing, 1/2 NPT Thread Male Tee Branch Stainless Steel Push in Fitting

1-2 O.D Tubing, 1/2 NPT Male Tee Branch Stainless Steel Push in Fitting

Part No. TUBE R L1 L2 L3 D1 CH1 CH2
SPB 1/2-N04 1/2" 1/2 NPT 29mm 35.5mm 14mm 20.5mm 15.5mm 22mm
There are no reviews for this product.
Write a review
BadExcellent