PNEUFLEX 1/2" O.D Tubing, BSPP, G 1/4 Thread Flow Control Regulator Stainless Steel Push in Fitting 1/2 inch O.D Tubing, BSPP, G 1/4 Flow Control Regulator Stainless Steel Push in Fitting Pneuflex SJSC 1/2-G02, stainless steel flow control regulator has a male G, BSPP 1/4 thread with FKM.. Product #: SJSC 1/2-G02 SJSC 1/2-G02 5 based on 0 reviews

SJSC 1/2-G02, 1/2" O.D Tubing, BSPP, G 1/4 Thread Flow Control Regulator Stainless Steel Push in Fitting

Pneuflex SJSC 1/2-G02, stainless steel flow control regulator has a male G, BSPP 1/4 thread with FKM o-ring and a 1/2" O.D tubing connection at a 90-degree angle, provides accurate flow regulation for precise speed control of pneumatic cylinders as well as gas flow in environments with high temperature, mechanical or chemical constraints. 1/2" x BSPP, G 1/4 flow control regulator stainless steel push in fitting with o-ring is made of 316 stainless steel for corrosion resistance, FKM o-ring for chemical-resistance. 1/2" O.D tubing, BSPP, G 1/4 thread stainless steel flow control regulator is designed to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Control-out and control-in flow control valves are available.

Part #: SJSC 1/2-G02
Push-in Tubing O.D: 1/2"
Thread Size: BSPP, G 1/4
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SJSC 1/2-G02, 1/2" O.D Tubing, BSPP, G 1/4 Thread Flow Control Regulator Stainless Steel Push in Fitting

1/2 inch O.D Tubing, BSPP, G 1/4 Flow Control Regulator Stainless Steel Push in Fitting

Part No. TUBE G L1 L2 L3 D1 CH
SJSC 1/2-G02 1/2" G1/4 45mm 36mm 7mm 18.6mm 14mm
There are no reviews for this product.
Write a review
BadExcellent