PNEUFLEX 10 mm O.D Tubing to R, PT, BSPT 1/2 Thread Flow Controller Stainless Steel Push in Fitting 10 mm O.D Tubing to R, PT, BSPT 1/2 Flow Controller Stainless Steel Push in Fitting Pneuflex SJSC 10-04, stainless steel flow controller has a male R, PT, BSPT 1/2 thread and a 10 mm O.. Product #: SJSC 10-04 SJSC 10-04 5 based on 0 reviews

SJSC 10-04, 10 mm O.D Tubing to R, PT, BSPT 1/2 Flow Controller Stainless Steel Push in Fitting

Pneuflex SJSC 10-04, stainless steel flow controller has a male R, PT, BSPT 1/2 thread and a 10 mm O.D tubing connection at a 90-degree angle, provides accurate flow regulation for precise speed control of pneumatic cylinders as well as gas flow in environments with high temperature, mechanical or chemical constraints. 10 mm x R, PT, BSPT 1/2 flow controller stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 10 mm O.D tubing to R, PT, BSPT 1/2 thread stainless steel flow controller is designed to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Control-out and control-in flow control valves are available.

Part #: SJSC 10-04
Push-in Tubing O.D: 10mm
Thread Size: PT, R, BSPT 1/2
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SJSC 10-04, 10 mm O.D Tubing to R, PT, BSPT 1/2 Thread Flow Controller Stainless Steel Push in Fitting

10 mm O.D Tubing - R, PT, BSPT 1/2 Flow Controller Stainless Steel Push in Fitting

Part No. TUBE R L1 L2 L3 D1 CH
SJSC 10-04 10mm R1/2 56mm 34mm 12.5mm 17.5mm 22mm
There are no reviews for this product.
Write a review
BadExcellent