SPU 12, 12 mm Tube O.D Union Connector Stainless Steel Push in Fitting
Pneuflex SPU 12 union connector stainless steel push in fitting (stainless steel push to connect fitting) connects two 12 mm O.D nylon, polyurethane, polyethylene or Teflon tubing on both ends. 12 mm to 12 mm tube O.D union connector stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 12 mm tube O.D union connector stainless steel fittings are designed to withstand corrosive environments (substances), to channel aggressive fluids and to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions.
Part #:
SPU 12
Push-in Tubing O.D:
12mm
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS
Dimensions of SPU 12, 12 mm Tube O.D, Union Connector Stainless Steel Push in Fitting
| Part No. | Tube | L1 | D2 |
| SPU 12 | 12mm | 40mm | 19mm |
There are no reviews for this product.
Write a review
BadExcellent