PNEUFLEX 14 mm O.D Tubing, R, PT, BSPT 1/2 Thread Male Tee Branch Stainless Steel Push in Fitting 14 mm O.D Tubing, R, PT, BSPT 1/2 Male Tee Branch Stainless Steel Push in Fitting Pneuflex SPB 14-04 male tee branch stainless steel push in fitting (stainless steel push to connect .. Product #: SPB 14-04 SPB 14-04 5 based on 0 reviews

SPB 14-04, 14 mm O.D Tubing, R, PT, BSPT 1/2 Thread Male Tee Branch Stainless Steel Push in Fitting

Pneuflex SPB 14-04 male tee branch stainless steel push in fitting (stainless steel push to connect fitting) is T configuration, and has two 14 mm tubing connections on the main run and a male R, PT, BSPT 1/2 thread on the branch at a 90-degree angle from the middle of the tee. The body of male tee branch stainless steel push in fitting can be rotated after installation. 14 mm x R, PT, BSPT 1/2 male tee branch stainless steel push in fitting is made of 316 stainless steel for corrosion and abrasion resistance, FKM seal material for chemical-resistance. 14 mm O.D tubing, R, PT, BSPT 1/2 thread male branch tee stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature, food and wash-down applications. External tightening with a flat wrench.

Part #: SPB 14-04
Push-in Tubing O.D: 14mm
Thread Size: PT, R, BSPT 1/2
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPB 14-04, 14 mm O.D Tubing, R, PT, BSPT 1/2 Thread Male Tee Branch Stainless Steel Push in Fitting

14 mm O.D Tubing, R, PT, BSPT 1/2 Male Tee Branch Stainless Steel Push in Fitting

Part No. TUBE R L1 L2 L3 D1 CH1 CH2
SPB 14-04 14mm R1/2 33mm 36mm 14mm 22mm 20.6mm 22mm
There are no reviews for this product.
Write a review
BadExcellent