PNEUFLEX 16 mm O.D Tubing, 3/8 NPT Thread Swivel Male Branch Tee Stainless Steel Push in Fitting 16 mm O.D Tubing, 3/8 NPT Swivel Male Branch Tee Stainless Steel Push in Fitting Pneuflex SPB 16-N03 swivel male branch tee stainless steel push in fitting (stainless steel push to .. Product #: SPB 16-N03 SPB 16-N03 5 based on 0 reviews

SPB 16-N03, 16 mm O.D Tubing, 3/8 NPT Thread Swivel Male Branch Tee Stainless Steel Push in Fitting

Pneuflex SPB 16-N03 swivel male branch tee stainless steel push in fitting (stainless steel push to connect fitting) is T configuration, and has two 16 mm tubing connections on the main run and a male 3/8 NPT thread on the branch at a 90-degree angle from the middle of the tee. The body of swivel male branch tee stainless steel push in fitting can be rotated after installation. 16 mm x 3/8 NPT swivel male branch tee stainless steel push in fitting is made of 316 stainless steel for corrosion and abrasion resistance, FKM seal material for chemical-resistance. 16 mm O.D tubing, 3/8 NPT thread male branch tee stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature, food and wash-down applications. External tightening with a flat wrench.

Part #: SPB 16-N03
Push-in Tubing O.D: 16mm
Thread Size: 3/8 NPT
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPB 16-N03, 16 mm O.D Tubing, 3/8 NPT Thread Swivel Male Branch Tee Stainless Steel Push in Fitting

16 mm O.D Tubing, 3/8 NPT Swivel Male Branch Tee Stainless Steel Push in Fitting

Part No. TUBE R L1 L2 L3 D1 CH1 CH2
SPB 16-N03 16mm 3/8 NPT 35mm 35mm 11mm 24mm 20.6mm 22mm
There are no reviews for this product.
Write a review
BadExcellent