PNEUFLEX 3/8" O.D Tubing, 3/8 NPT Thread 90-Degree Banjo Elbow Stainless Steel Push in Fitting 3/8 inch O.D Tubing, 3/8 NPT 90-Degree Banjo Elbow Stainless Steel Push in Fitting Pneuflex SPH 3/8-N03 90-degree banjo elbow stainless steel push in fitting (stainless steel push to .. Product #: SPH 3/8-N03 SPH 3/8-N03 5 based on 0 reviews

SPH 3/8-N03, 3/8" O.D Tubing, 3/8 NPT Thread 90-Degree Banjo Elbow Stainless Steel Push in Fitting

Pneuflex SPH 3/8-N03 90-degree banjo elbow stainless steel push in fitting (stainless steel push to connect fitting) connects a 3/8" O.D nylon, polyurethane, polyethylene or Teflon tubing to a female 3/8 NPT threaded connection at a right angle. Stainless steel push in fitting 90-degree banjo elbow has hexagon head to allow tightening with a wrench or spanner in confined spaces. The body of male banjo stainless steel push in fitting can be rotated after installation. 3/8" x 3/8 NPT 90-degree banjo elbow stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 3/8" O.D tubing, 3/8 NPT thread male banjo elbow stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature and wash-down applications.

Part #: SPH 3/8-N03
Push-in Tubing O.D: 3/8"
Thread Size: 3/8 NPT
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPH 3/8-N03, 3/8" O.D Tubing, 3/8 NPT Thread 90-Degree Banjo Elbow Stainless Steel Push in Fitting

3/8 inch O.D Tubing, 3/8 NPT 90-Degree Banjo Elbow Stainless Steel Push in Fitting

Part No. TUBE R L1 L2 L3 D1 CH
SPH 3/8-N03 3/8" 3/8 NPT 30mm 35mm 11mm 15.6mm 19mm
There are no reviews for this product.
Write a review
BadExcellent