PNEUFLEX 3/8" O.D Tubing, BSPP, G 1/8 Thread Male Banjo Stainless Steel Push in Fitting 3/8 inch O.D Tubing, BSPP, G 1/8 Male Banjo Stainless Steel Push in Fitting Pneuflex SPH 3/8-G01 male banjo stainless steel push in fitting (stainless steel push to connect fit.. Product #: SPH 3/8-G01 SPH 3/8-G01 5 based on 0 reviews

SPH 3/8-G01, 3/8" O.D Tubing, BSPP, G 1/8 Thread Male Banjo Stainless Steel Push in Fitting

Pneuflex SPH 3/8-G01 male banjo stainless steel push in fitting (stainless steel push to connect fitting) connects a 3/8" OD nylon, polyurethane, polyethylene or Teflon tubing to a female BSPP, G 1/8 threaded connection at a 90-degree angle. Stainless steel push in fitting male banjo has hexagon head to allow tightening with a wrench or spanner in confined spaces. The male BSPP, G 1/8 thread seals with use of an FKM (Viton) o-ring. The body of male banjo stainless steel push in fitting can be rotated after installation. 3/8" x BSPP, G 1/8 male elbow stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM o-ring for chemical-resistance. 3/8" O.D tubing, BSPP, G 1/8 thread male banjo elbow stainless steel push in fitting with o-ring is suitable for use with air, water, oil and steam in high temperature and wash-down applications.

Part #: SPH 3/8-G01
Push-in Tubing O.D: 3/8"
Thread Size: BSPP, G 1/8
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPH 3/8-G01, 3/8" O.D Tubing, BSPP, G 1/8 Thread Male Banjo Stainless Steel Push in Fitting

3/8 inch O.D Tubing, BSPP, G 1/8 Male Banjo Stainless Steel Push in Fitting

Part No. TUBE G L1 L2 L3 D1 CH
SPH 3/8-G01 3/8" G1/8 26mm 35mm 6mm 15.6mm 12mm
There are no reviews for this product.
Write a review
BadExcellent