PNEUFLEX 3/8" O.D Tubing, R, PT, BSPT 3/8 Thread Swivel Branch Tee Stainless Steel Push in Fitting 3/8 inch O.D Tubing, R, PT, BSPT 3/8 Swivel Branch Tee Stainless Steel Push in Fitting Pneuflex SPB 3/8-03 swivel branch tee stainless steel push in fitting (stainless steel push to conne.. Product #: SPB 3/8-03 SPB 3/8-03 5 based on 0 reviews

SPB 3/8-03, 3/8" O.D Tubing, R, PT, BSPT 3/8 Thread Swivel Branch Tee Stainless Steel Push in Fitting

Pneuflex SPB 3/8-03 swivel branch tee stainless steel push in fitting (stainless steel push to connect fitting) is T configuration, and has two 3/8" tubing connections on the main run and a male R, PT, BSPT 3/8 thread on the branch at a 90-degree angle from the middle of the tee. The body of swivel branch tee stainless steel push in fitting can be rotated after installation. 3/8" x R, PT, BSPT 3/8 swivel branch tee stainless steel push in fitting is made of 316 stainless steel for corrosion and abrasion resistance, FKM seal material for chemical-resistance. 3/8" O.D tubing, R, PT, BSPT 3/8 thread male branch tee stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature, food and wash-down applications. External tightening with a flat wrench.

Part #: SPB 3/8-03
Push-in Tubing O.D: 3/8"
Thread Size: PT, R, BSPT 3/8
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPB 3/8-03, 3/8" O.D Tubing, R, PT, BSPT 3/8 Thread Swivel Branch Tee Stainless Steel Push in Fitting

3/8 inch O.D Tubing, R, PT, BSPT 3/8 Swivel Branch Tee Stainless Steel Push in Fitting

Part No. TUBE R L1 L2 L3 D1 CH1 CH2
SPB 3/8-03 3/8" R3/8 26.5mm 28mm 11mm 17.5mm 13.2mm 17mm
There are no reviews for this product.
Write a review
BadExcellent