SPB-G Male Branch Tee | BSPP, G Thread Stainless Steel Push in Fittings, Stainless Steel Fittings

SPB-G BSPP, G thread stainless steel push in fitting male branch tee is used to connect a female G, BSP, BSPP threaded connection to two push-to-connect tubing at 90-degree angles. The male BSPP, G thread seals with use of an FKM / Viton o-ring. BSPP, G thread stainless steel push in fitting male branch tee is made of 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel; the FKM sealing material is chemical-resistant. These stainless steel fittings are designed to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Male branch tee stainless steel fittings can be used with a variety of tubing materials. Male branch tee stainless steel push to connect fitting with o-ring has a swivel (rotate 360°) hexagonal thread allowing tightening with flat spanner. You can find stainless steel push-in fittings with threads in following sizes: G, BSP, BSPP 1/8 to G, BSP, BSPP 1/2, for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".

Part #: SPB-G Male Branch Tee
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From G (BSP, BSPP) 1/8 to G (BSP, BSPP) 1/2
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Sealing and O-ring: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F