SPL-G Male Elbow | BSPP, G Thread Stainless Steel Push in Fittings

SPL-G stainless steel push in fitting male elbow is used to connect a metric or inch tubing to a female BSPP, G threaded connection at a right angle. The BSPP, G thread seals with use of an FKM (Viton) o-ring. BSPP, G thread stainless steel push in fitting male elbow is made of 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel, the FKM seal O-ring is chemical-resistant. These fittings are designed to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. BSPP, G thread male elbow stainless steel fittings can be used with a variety of tubing materials. Male elbow stainless steel push to connect fittings have swivel (rotate 360°) hexagonal thread allowing tightening with flat spanner.You can find push-in fittings with threads in following sizes: G,BSP, BSPP 1/8 to G,BSP, BSPP 1/2, for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".

Part #: SPL-G Male Elbow
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From G (BSP, BSPP) 1/8 to G (BSP, BSPP) 1/2
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Sealing and O-ring: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F