SPC-G Male Straight Connector, 316 Stainless Steel Push in Fittings for Metric Tubing / Inch Tubing, BSPP, G Thread

SPC-G BSPP,G thread stainless push in fitting male straight connector connects tubing to G, BSP, BSPP female threaded connection in an inline configuration. The BSPP, G thread seals with use of an FKM (Viton) o-ring. BSPP, G thread stainless steel push in fitting male connector is made of 316 stainless steel for corrosion resistance, FKM (Viton) o-ring for chemical-resistance. These fittings are designed to be used in the food, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Male straight connector (hex body) stainless steel fittings can be used with a variety of tubing materials. Male straight connector stainless steel push to connect fittings have hexagonal body allowing tightening with wrench or Allen tool from the inner hexagon. In this category you can find push-in fittings with threads in following sizes: G (BSP, BSPP) 1/8 to G (BSP, BSPP) 1/2, for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".

Part #: SPC-G Male Straight Connector
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From G,  BSP, BSPP 1/8 to G, BSP BSPP 1/2
Body Material: 316 Stainless Steel
Sealing and O-ring: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290.0 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F