SPMF Bulkhead Female Connector | Stainless Steel Push in Fittings, Stainless Steel Push to Connect Fittings

SPMF stainless steel push in fitting bulkhead female connector is used to connect a male threaded connection and tubing through a panel or other barrier. When there is a need to move tube through some obstacle. Simply drill a hole, push one part of bulkhead through it, and then screw second part onto the other side. Stainless steel push in fitting bulkhead female connector is made of 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel; the FKM sealing material is chemical-resistant. These stainless steel fittings are designed to be used in the food, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Bulkhead female connector stainless steel push to connect fittings have hexagonal body allowing tightening with wrench. In this category you can find stainless steel push-in fittings with threads in following sizes: R, PT, BSPT 1/8 to  R, PT, BSPT 1/2, and 10-24 UNC, 10-32 UNF, 1/8 NPT to 1/2 NPT for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".

Part #: SPMF Bulkhead Female Connector
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From BSPT 1/8 to BSPT 1/2; 10-24 UNC to 1/2 NPT
Body Material: 316 Stainless Steel
Sealing: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20~150°C | -4~302°F

Products of SPMF Bulkhead Female Connector