SPH Male Banjo Elbow | Stainless Steel Push in Fittings, Stainless Steel Push to Connect Fittings
SPH stainless steel push in fitting male banjo elbow is used to connect tubing to female thread at a right angle. Male banjo elbow stainless steel push in fitting with hexagon head on the top allows tightening with a hexagon wrench or flat spanner in confined spaces. Stainless steel push in fitting male banjo elbow is made of 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel; the KM sealing material is chemical-resistant. These stainless steel push to connection fittings are designed to withstand corrosive environments (substances), to channel aggressive fluids and to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. In this category you can find stainless steel fittings with threads in following sizes: R (PT, BSPT) 1/8 to R (PT, BSPT) 1/2, and 10-24 UNC, 10-32 UNF, 1/8 NPT to 1/2 NPT; for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From BSPT 1/8 to BSPT 1/2; 10-24 UNC to 1/2 NPT
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Sealing: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F
Products of SPH Male Banjo Elbow
| Part No. | Push-in Tubing O.D | Thread Size | Add to Quote |
|---|---|---|---|
| SPH 04-M5 | 4mm | M5 x 0.8 | |
| SPH 04-M6 | 4mm | M6 x 1 | |
| SPH 04-01 | 4mm | PT, R, BSPT 1/8 | |
| SPH 04-02 | 4mm | PT, R, BSPT 1/4 | |
| SPH 06-M5 | 6mm | M5 x 0.8 | |
| SPH 06-M6 | 6mm | M6 x 1 | |
| SPH 06-01 | 6mm | PT, R, BSPT 1/8 | |
| SPH 06-02 | 6mm | PT, R, BSPT 1/4 | |
| SPH 08-01 | 8mm | PT, R, BSPT 1/8 | |
| SPH 08-02 | 8mm | PT, R, BSPT 1/4 | |
| SPH 08-03 | 8mm | PT, R, BSPT 3/8 | |
| SPH 08-04 | 8mm | PT, R, BSPT 1/2 | |
| SPH 10-02 | 10mm | PT, R, BSPT 1/4 | |
| SPH 10-03 | 10mm | PT, R, BSPT 3/8 | |
| SPH 10-04 | 10mm | PT, R, BSPT 1/2 | |
| SPH 12-02 | 12mm | PT, R, BSPT 1/4 | |
| SPH 12-03 | 12mm | PT, R, BSPT 3/8 | |
| SPH 12-04 | 12mm | PT, R, BSPT 1/2 | |
| SPH 5/32-M5 | 5/32" | M5 x 0.8 | |
| SPH 5/32-M6 | 5/32" | M6 x 1 | |
| SPH 5/32-01 | 5/32" | PT, R, BSPT 1/8 | |
| SPH 5/32-02 | 5/32" | PT, R, BSPT 1/4 | |
| SPH 1/4-M5 | 1/4" | M5 x 0.8 | |
| SPH 1/4-M6 | 1/4" | M6 x 1 | |
| SPH 1/4-01 | 1/4" | PT, R, BSPT 1/8 | |
| SPH 1/4-02 | 1/4" | PT, R, BSPT 1/4 | |
| SPH 5/16-01 | 5/16" | PT, R, BSPT 1/8 | |
| SPH 5/16-02 | 5/16" | PT, R, BSPT 1/4 | |
| SPH 5/16-03 | 5/16" | PT, R, BSPT 3/8 | |
| SPH 5/16-04 | 5/16" | PT, R, BSPT 1/2 | |
| SPH 3/8-02 | 3/8" | PT, R, BSPT 1/4 | |
| SPH 3/8-03 | 3/8" | PT, R, BSPT 3/8 | |
| SPH 3/8-04 | 3/8" | PT, R, BSPT 1/2 | |
| SPH 1/2-02 | 1/2" | PT, R, BSPT 1/4 | |
| SPH 1/2-03 | 1/2" | PT, R, BSPT 3/8 | |
| SPH 1/2-04 | 1/2" | PT, R, BSPT 1/2 | |
| SPH 5/32-N01 | 5/32" | 1/8 NPT | |
| SPH 5/32-N02 | 5/32" | PT, R, BSPT 1/4 | |
| SPH 1/4-N01 | 1/4" | 1/8 NPT | |
| SPH 1/4-N02 | 1/4" | 1/4 NPT | |
| SPH 5/16-N01 | 5/16" | 1/8 NPT | |
| SPH 5/16-N02 | 5/16" | 1/4 NPT | |
| SPH 5/16-N03 | 5/16" | 3/8 NPT | |
| SPH 5/16-N04 | 5/16" | 1/2 NPT | |
| SPH 3/8-N02 | 3/8" | 1/4 NPT | |
| SPH 3/8-N03 | 3/8" | 3/8 NPT | |
| SPH 3/8-N04 | 3/8" | 1/2 NPT | |
| SPH 1/2-N02 | 1/2" | 1/4 NPT | |
| SPH 1/2-N03 | 1/2" | 3/8 NPT | |
| SPH 1/2-N04 | 1/2" | 1/2 NPT | |
| SPH 04-N01 | 4mm | 1/8 NPT | |
| SPH 04-N02 | 4mm | 1/4 NPT | |
| SPH 06-N01 | 6mm | 1/8 NPT | |
| SPH 06-N02 | 6mm | 1/4 NPT | |
| SPH 08-N01 | 8mm | 1/8 NPT | |
| SPH 08-N02 | 8mm | 1/4 NPT | |
| SPH 08-N03 | 8mm | 3/8 NPT | |
| SPH 08-N04 | 8mm | 1/2 NPT | |
| SPH 10-N02 | 10mm | 1/4 NPT | |
| SPH 10-N03 | 10mm | 3/8 NPT | |
| SPH 10-N04 | 10mm | 1/2 NPT | |
| SPH 12-N02 | 12mm | 1/4 NPT | |
| SPH 12-N03 | 12mm | 3/8 NPT | |
| SPH 12-N04 | 12mm | 1/2 NPT |