SPL Male Elbow | Stainless Steel Push in Fittings, Stainless Steel Push to Connect Fittings

SPL stainless steel push in fitting male elbow is used to connect a tubing to a female threaded connection at a right angle. Stainless steel push in fitting male elbow is made of 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel; the FKM sealing material is chemical-resistant. These stainless steel fittings are designed to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Male elbow stainless steel fittings can be used with a variety of tubing materials. Male elbow stainless steel push to connect fittings have swivel (rotate 360°) hexagonal thread allowing tightening with flat spanner. You can find stainless steel push-in fittings with threads in following sizes: R, PT, BSPT 1/8 to R, PT, BSPT 1/2, and 10-24 UNC, 10-32 UNF, 1/8  NPT to 1/2 NPT, for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".

Part #: SPL Male Elbow
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Thread Size: From BSPT 1/8 to BSPT 1/2; 10-24 UNC to 1/2 NPT
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Sealing: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20～150°C | -4～302°F