PNEUFLEX 4 mm O.D Tubing, 1/8 NPT Thread Male Branch Tee Stainless Steel Push in Fitting 4 mm O.D Tubing, 1/8 NPT Male Branch Tee Stainless Steel Push in Fitting Pneuflex SPB 04-N01 male branch tee stainless steel push in fitting (stainless steel push to connect.. Product #: SPB 04-N01 SPB 04-N01 5 based on 0 reviews

SPB 04-N01, 4 mm O.D Tubing, 1/8 NPT Thread Male Branch Tee Stainless Steel Push in Fitting

Pneuflex SPB 04-N01 male branch tee stainless steel push in fitting (stainless steel push to connect fitting) is T configuration, and has two 4 mm tubing connections on the main run and a male 1/8 NPT thread on the branch at a 90-degree angle from the middle of the tee. The body of male branch tee stainless steel push in fitting can be rotated after installation. 4 mm x 1/8 NPT male tee stainless steel push in fitting is made of 316 stainless steel for corrosion and abrasion resistance, FKM seal material for chemical-resistance. 4 mm O.D tubing, 1/8 NPT thread male branch tee stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature, food and wash-down applications. External tightening with a flat wrench.

Part #: SPB 04-N01
Push-in Tubing O.D: 4mm
Thread Size: 1/8 NPT
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPB 04-N01, 4 mm O.D Tubing, 1/8 NPT Thread Male Branch Tee Stainless Steel Push in Fitting

4 mm O.D Tubing, 1/8 NPT Male Branch Tee Stainless Steel Push in Fitting

Part No. TUBE R L1 L2 L3 D1 CH1 CH2
SPB 04-N01 4mm 1/8 NPT 17mm 17.5mm 8mm 10.5mm 9.2mm 11mm
There are no reviews for this product.
Write a review
BadExcellent