PNEUFLEX 4 mm O.D Tubing, M6 x 1 Thread Male Banjo Elbow Stainless Steel Push in Fitting 4 mm O.D Tubing, M6 x 1 Male Banjo Elbow Stainless Steel Push in Fitting Pneuflex SPH 04-M6 male banjo elbow stainless steel push in fitting (stainless steel push to connect.. Product #: SPH 04-M6 SPH 04-M6 5 based on 0 reviews

SPH 04-M6, 4 mm O.D Tubing, M6 x 1 Thread Male Banjo Elbow Stainless Steel Push in Fitting

Pneuflex SPH 04-M6 male banjo elbow stainless steel push in fitting (stainless steel push to connect fitting) connects a 4 mm OD nylon, polyurethane, polyethylene or Teflon tubing to a female M6 x 1 threaded connection at a 90-degree angle. Stainless steel push in fitting male banjo elbow has hexagon head to allow tightening with a wrench or spanner in confined spaces. The male M6 x 1 thread seals with use of an FKM (Viton) o-ring. The body of male banjo elbow stainless steel push in fitting can be rotated after installation. 4 mm x M6 male banjo stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 4 mm O.D tubing, M6 x 1 thread male banjo elbow stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature and wash-down applications.

Part #: SPH 04-M6
Push-in Tubing O.D: 4mm
Thread Size: M6 x 1
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPH 04-M6, 4 mm O.D Tubing, M6 x 1 Thread Male Banjo Elbow Stainless Steel Push in Fitting

4 mm O.D Tubing, M6 x 1 Male Banjo Elbow Stainless Steel Push in Fitting

Part No. TUBE R L1 L2 L3 D1 CH
SPH 04-M6 4mm M6 x 1 22mm 26mm 4mm 9mm 12mm
There are no reviews for this product.
Write a review
BadExcellent