SPV 04, 4 mm O.D Tubing Union Elbow Stainless Steel Push in Fitting
Pneuflex SPV 04 union elbow stainless steel push in fitting (stainless steel push to connect fitting) connects two 4 mm O.D nylon, polyurethane, polyethylene or Teflon tubing on both ends at a right angle. 4 mm tubing O.D union elbow stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 4 mm O.D tubing union elbow stainless steel fittings are designed to withstand corrosive environments (substances), to channel aggressive fluids and to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions.
Part #:
SPV 04
Push-in Tubing O.D:
4mm
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS
Dimensions of SPV 04, 4 mm O.D Tubing Union Elbow Stainless Steel Push in Fitting
| Part No. | TUBE | L1 | L3 | D1 | CH1 |
| SPV 04 | 4mm | 17mm | 17mm | 9mm | 9.2mm |
There are no reviews for this product.
Write a review
BadExcellent