PNEUFLEX 5/16" O.D Tubing, 1/4 NPT Thread Male Banjo Elbow Stainless Steel Push in Fitting 5/16 inch O.D Tubing, 1/4 NPT Male Banjo Elbow Stainless Steel Push in Fitting Pneuflex SPH 5/16-N02 male banjo elbow stainless steel push in fitting (stainless steel push to conn.. Product #: SPH 5/16-N02 SPH 5/16-N02 5 based on 0 reviews

SPH 5/16-N02, 5/16" O.D Tubing, 1/4 NPT Thread Male Banjo Elbow Stainless Steel Push in Fitting

Pneuflex SPH 5/16-N02 male banjo elbow stainless steel push in fitting (stainless steel push to connect fitting) connects a 5/16" O.D nylon, polyurethane, polyethylene or Teflon tubing to a female 1/4 NPT threaded connection at a 90-degree angle. Stainless steel push in fitting male banjo elbow has hexagon head to allow tightening with a wrench or spanner in confined spaces. The body of male banjo elbow stainless steel push in fitting can be rotated after installation. 5/16" x 1/4 NPT male banjo elbow stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 5/16" O.D tubing, 1/4 NPT thread male banjo stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature and wash-down applications.

Part #: SPH 5/16-N02
Push-in Tubing O.D: 5/16"
Thread Size: 1/4 NPT
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPH 5/16-N02, 5/16" O.D Tubing, 1/4 NPT Thread Male Banjo Elbow Stainless Steel Push in Fitting

5/16 inch O.D Tubing, 1/4 NPT Male Banjo Elbow Stainless Steel Push in Fitting

Part No. TUBE R L1 L2 L3 D1 CH
SPH 5/16-N02 5/16" 1/4 NPT 30mm 31mm 11mm 13.6mm 17mm
There are no reviews for this product.
Write a review
BadExcellent