PNEUFLEX 5/16" O.D Tubing, BSPP, G 1/2 Thread Flow Controller Stainless Steel Push in Fitting 5/16 inch O.D Tubing, BSPP, G 1/2 Flow Controller Stainless Steel Push in Fitting Pneuflex SJSC 5/16-G04, stainless steel flow controller has a male G, BSPP 1/2 thread with FKM o-rin.. Product #: SJSC 5/16-G04 SJSC 5/16-G04 5 based on 0 reviews

SJSC 5/16-G04, 5/16" O.D Tubing, BSPP, G 1/2 Thread Flow Controller Stainless Steel Push in Fitting

Pneuflex SJSC 5/16-G04, stainless steel flow controller has a male G, BSPP 1/2 thread with FKM o-ring and a 5/16" O.D tubing connection at a 90-degree angle, provides accurate flow regulation for precise speed control of pneumatic cylinders as well as gas flow in environments with high temperature, mechanical or chemical constraints. 5/16" x BSPP, G 1/2 flow controller stainless steel push in fitting with o-ring is made of 316 stainless steel for corrosion resistance, FKM o-ring for chemical-resistance. 5/16" O.D tubing, BSPP, G 1/4 thread stainless steel flow controller is designed to be used in the food, dairy, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Control-out and control-in flow control valves are available.

Part #: SJSC 5/16-G04
Push-in Tubing O.D: 5/16"
Thread Size: BSPP, G 1/2
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SJSC 5/16-G04, 5/16" O.D Tubing, BSPP, G 1/2 Thread Flow Controller Stainless Steel Push in Fitting

5/16 inch O.D Tubing, BSPP, G 1/2 Flow Controller Stainless Steel Push in Fitting

Part No. TUBE G L1 L2 L3 D1 CH
SJSC 5/16"-G04 5/16" G1/2 56mm 35mm 8mm 13.6mm 22mm
There are no reviews for this product.
Write a review
BadExcellent