PNEUFLEX 5/16" O.D Tubing, BSPP, G 1/4 Thread Male Banjo Elbow Stainless Steel Push in Fitting 5/16 inch O.D Tubing, BSPP, G 1/4 Male Banjo Elbow Stainless Steel Push in Fitting Pneuflex SPH 5/16-G02 male banjo elbow stainless steel push in fitting (stainless steel push to conn.. Product #: SPH 5/16-G02 SPH 5/16-G02 5 based on 0 reviews

SPH 5/16-G02, 5/16" O.D Tubing, BSPP, G 1/4 Thread Male Banjo Elbow Stainless Steel Push in Fitting

Pneuflex SPH 5/16-G02 male banjo elbow stainless steel push in fitting (stainless steel push to connect fitting) connects a 5/16" OD nylon, polyurethane, polyethylene or Teflon tubing to a female BSPP, G 1/4 threaded connection at a 90-degree angle. Stainless steel push in fitting male banjo elbow has hexagon head to allow tightening with a wrench or spanner in confined spaces. The male BSPP, G 1/4 thread seals with use of an FKM (Viton) o-ring. The body of male banjo elbow stainless steel push in fitting can be rotated after installation. 5/16" x BSPP, G 1/4 male banjo elbow stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM o-ring for chemical-resistance. 5/16" O.D tubing, BSPP, G 1/4 thread male banjo stainless steel push in fitting with o-ring is suitable for use with air, water, oil and steam in high temperature and wash-down applications.

Part #: SPH 5/16-G02
Push-in Tubing O.D: 5/16"
Thread Size: BSPP, G 1/4
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPH 5/16-G02, 5/16" O.D Tubing, BSPP, G 1/4 Thread Male Banjo Elbow Stainless Steel Push in Fitting

5/16 inch O.D Tubing, BSPP, G 1/4 Male Banjo Elbow Stainless Steel Push in Fitting

Part No. TUBE G L1 L2 L3 D1 CH
SPH 5/16-G02 5/16" G1/4 26mm 31mm 7mm 13.6mm 14mm
There are no reviews for this product.
Write a review
BadExcellent