PNEUFLEX 5/16" O.D Tubing, R, PT, BSPT 1/8 Thread Male Branch Tee Stainless Steel Push in Fitting 5/16 inch O.D Tubing, R, PT, BSPT 1/8 Male Branch Tee Stainless Steel Push in Fitting Pneuflex SPB 5/16-01 male branch tee stainless steel push in fitting (stainless steel push to connec.. Product #: SPB 5/16-01 SPB 5/16-01 5 based on 0 reviews

SPB 5/16-01, 5/16" O.D Tubing, R, PT, BSPT 1/8 Thread Male Branch Tee Stainless Steel Push in Fitting

Pneuflex SPB 5/16-01 male branch tee stainless steel push in fitting (stainless steel push to connect fitting) is T configuration, and has two 5/16" tubing connections on the main run and a male R, PT, BSPT 1/8 thread on the branch at a 90-degree angle from the middle of the tee. The body of male branch tee stainless steel push in fitting can be rotated after installation. 5/16" x R, PT, BSPT 1/8 male tee stainless steel push in fitting is made of 316 stainless steel for corrosion and abrasion resistance, FKM seal material for chemical-resistance. 5/16" O.D tubing, R, PT, BSPT 1/8 thread male branch tee stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature, food and wash-down applications. External tightening with a flat wrench.

Part #: SPB 5/16-01
Push-in Tubing O.D: 5/16"
Thread Size: PT, R, BSPT 1/8
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPB 5/16-01, 5/16" O.D Tubing, R, PT, BSPT 1/8 Thread Male Branch Tee Stainless Steel Push in Fitting

5/16 inch O.D Tubing, R, PT, BSPT 1/8 Male Branch Tee Stainless Steel Push in Fitting

Part No. TUBE R L1 L2 L3 D1 CH1 CH2
SPB 5/16-01 5/16" R1/8 22mm 21mm 8mm 14.5mm 11.2mm 14mm
There are no reviews for this product.
Write a review
BadExcellent