SPB 5/32-M6, 5/32" O.D Tubing, M6 x 1 Thread Male Tee Stainless Steel Push in Fitting
Pneuflex SPB 5/32-M6 male tee stainless steel push in fitting (stainless steel push to connect fitting) is T configuration, and has two 5/32" tubing connections on the main run and a male M6 x 1 thread on the branch at a 90-degree angle from the middle of the tee. The male M6 x 1 thread seals with use of an FKM (Viton) o-ring. The body of male tee stainless steel push in fitting with o-ring can be rotated after installation. 5/32" x M6 male tee stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM seal material for chemical-resistance. 5/32" O.D tubing, M6 x 1 thread male branch tee stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature, food and wash-down applications. External tightening with a flat wrench.
Thread Size: M6 x 1
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS
Dimensions of SPB 5/32-M6, 5/32" O.D Tubing, M6 x 1 Thread Male Tee Stainless Steel Push in Fitting
| Part No. | TUBE | R | L1 | L2 | L3 | D1 | CH2 |
| SPB 5/32-M6 | 5/32" | M6 x 1 | 17mm | 14mm | 4.5mm | 10.5mm | 11mm |