PNEUFLEX 6 mm O.D Tubing, BSPP, G 1/8 Thread Male Branch Tee Stainless Steel Push in Fitting 6 mm O.D Tubing, BSPP, G 1/8 Male Branch Tee Stainless Steel Push in Fitting Pneuflex SPB 06-G01 male branch tee stainless steel push in fitting (stainless steel push to connect.. Product #: SPB 06-G01 SPB 06-G01 5 based on 0 reviews

SPB 06-G01, 6 mm O.D Tubing, BSPP, G 1/8 Thread Male Branch Tee Stainless Steel Push in Fitting

Pneuflex SPB 06-G01 male branch tee stainless steel push in fitting (stainless steel push to connect fitting) is T configuration, and has two 6 mm tubing connections on the main run and a male BSPP,G 1/8 threa on the branch at a 90-degree angle from the middle of the tee. The male BSPP, G 1/8 thread seals with use of an FKM (Viton) o-ring. The body of male branch tee stainless steel push in fitting with o-ring can be rotated after installation. 6 mm x BSPP, G 1/8 male tee stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM o-ring for chemical-resistance. 6 mm O.D tubing, BSPP, G 1/8 thread male branch tee stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature, food and wash-down applications. External tightening with a flat wrench.

Part #: SPB 06-G01
Push-in Tubing O.D: 6mm
Thread Size: BSPP, G 1/8
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPB 06-G01, 6 mm O.D Tubing, BSPP, G 1/8 Thread Male Branch Tee Stainless Steel Push in Fitting

6 mm O.D Tubing, BSPP, G 1/8 Male Branch Tee Stainless Steel Push in Fitting

Part No. TUBE G L1 L2 L3 D1 CH2
SPB 06-G01 6mm G1/8 48mm 25mm 6mm 12.5mm 14mm
There are no reviews for this product.
Write a review
BadExcellent