BPL 06-M6 | 6 mm O.D Tubing to M6 x 1 Thread Swivel Male Elbow | Nickel Plated Brass Push in Fitting

Pneuflex BPL 06-M6 swivel male elbow nickel plated brass push in fitting (nickel plated brass push to connect fitting)  has 6mm tubing and M6x1.0 male connectors at a 90-degree angle. The fitting is made of nickel-plated brass for durability and corrosion resistance. The working pressure for this fitting is up to 2.0Mpa, and its operating temperature ranges from -20 to 150°C. 6 mm O.D tubing to M6x1.0 thread swivel male elbow nickel plated brass push in fitting be installed/removed easily. To install, simply push the Straight-cut tubing (Outer Diameter) in metal sleeve; remove tubing by pressing the release ring and pulling the tube from the fitting. Swivel male elbow nickel plated brass push in fitting is suitable for use with Polyurethane, Nylon, Polyethylene tubing.

Part #: BPL 06-M6

Push-in Tubing O.D: 6mm
Thread Size: M6 x 1
Fluid Admitted: Air, Vaccum, Water*
Body Material: Nickel Plated Brass
Thread Sealing: O-ring
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F

0 Reviews | Write a review