SPB 08-G04, 8 mm O.D Tubing, BSPP, G 1/2 Thread Swivel Male Branch Tee Stainless Steel Push in Fitting
Pneuflex SPB 08-G04 swivel male branch tee stainless steel push in fitting (stainless steel push to connect fitting) is T configuration, and has two 8 mm tube connections on the main run and a male BSPP,G 1/2 thread on the branch at a 90-degree angle from the middle of the tee. The male BSPP, G 1/2 thread seals with use of an FKM (Viton) o-ring. The body of male branch tee stainless steel push in fitting with o-ring can be rotated after installation. 8 mm x BSPP, G 1/2 swivel male branch tee stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM o-ring for chemical-resistance. 8 mm O.D tubing, BSPP, G 1/2 thread male branch tee stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature, food and wash-down applications. External tightening with a flat wrench.
Thread Size: BSPP, G 1/2
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS
Dimensions of SPB 08-G04, 8 mm O.D Tubing, BSPP, G 1/2 Thread Swivel Male Branch Tee Stainless Steel Push in Fitting
| Part No. | TUBE | G | L1 | L2 | L3 | D1 | CH2 |
| SPB 08-G04 | 8mm | G1/2 | 54mm | 35mm | 8mm | 14.5mm | 24mm |