PNEUFLEX 8 mm O.D Tubing, BSPP, G 3/8 Thread 90-Degree Banjo Elbow Stainless Steel Push in Fitting 8 mm O.D Tubing, BSPP, G 3/8 90-Degree Banjo Elbow Stainless Steel Push in Fitting Pneuflex SPH 08-G03 90-degree banjo elbow stainless steel push in fitting (stainless steel push to c.. Product #: SPH 08-G03 SPH 08-G03 5 based on 0 reviews

SPH 08-G03, 8 mm O.D Tubing, BSPP, G 3/8 Thread 90-Degree Banjo Elbow Stainless Steel Push in Fitting

Pneuflex SPH 08-G03 90-degree banjo elbow stainless steel push in fitting (stainless steel push to connect fitting) connects a 8 mm OD nylon, polyurethane, polyethylene or Teflon tubing to a female BSPP, G 3/8 threaded connection at a right angle. Stainless steel push in fitting 90-degree banjo elbow has hexagon head to allow tightening with a wrench or spanner in confined spaces. The male BSPP, G 3/8 thread seals with use of an FKM (Viton) o-ring. The body of 90-degree banjo elbow stainless steel push in fitting can be rotated after installation. 8 mm x BSPP, G 3/8 male banjo stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM o-ring for chemical-resistance. 8 mm O.D tubing, BSPP, G 3/8 thread male banjo elbow stainless steel push in fitting with o-ring is suitable for use with air, water, oil and steam in high temperature and wash-down applications.

Part #: SPH 08-G03
Push-in Tubing O.D: 8mm
Thread Size: BSPP, G 3/8
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPH 08-G03, 8 mm O.D Tubing, BSPP, G 3/8 Thread 90-Degree Banjo Elbow Stainless Steel Push in Fitting

8 mm O.D Tubing, BSPP, G 3/8 90-Degree Banjo Elbow Stainless Steel Push in Fitting

Part No. TUBE G L1 L2 L3 D1 CH
SPH 08-G03 8mm G3/8 26mm 34mm 8mm 13.6mm 19mm
There are no reviews for this product.
Write a review
BadExcellent