PNEUFLEX 8 mm O.D Tubing, BSPP, G 3/8 Thread Male Tee Branch Stainless Steel Push in Fitting 8 mm O.D Tubing, BSPP, G 3/8 Male Tee Branch Stainless Steel Push in Fitting Pneuflex SPB 08-G03 male tee branch stainless steel push in fitting (stainless steel push to connect.. Product #: SPB 08-G03 SPB 08-G03 5 based on 0 reviews

SPB 08-G03, 8 mm O.D Tubing, BSPP, G 3/8 Thread Male Tee Branch Stainless Steel Push in Fitting

Pneuflex SPB 08-G03 male tee branch stainless steel push in fitting (stainless steel push to connect fitting) is T configuration, and has two 8 mm tubing connections on the main run and a male BSPP,G 3/8 thread on the branch at a 90-degree angle from the middle of the tee. The male BSPP,G 3/8 thread seals with use of an FKM (Viton) o-ring. The body of male tee branch stainless steel push in fitting with o-ring can be rotated after installation. 8 mm x BSPP, G 3/8 male tee stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM o-ring for chemical-resistance. 8 mm O.D tubing, BSPP, G 3/8 thread male branch tee stainless steel push in fitting is suitable for use with air, water, oil and steam in high temperature, food and wash-down applications. External tightening with a flat wrench.

Part #: SPB 08-G03
Push-in Tubing O.D: 8mm
Thread Size: BSPP, G 3/8
Fluid Admitted: Air, Vaccum, Water*, Steam, Oil
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0 — 2.0MPa | 0 — 290psi
Proof Pressure: 3.0MPa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20—150°C | -4—302°F
MOQ: 50PCS

Dimensions of SPB 08-G03, 8 mm O.D Tubing, BSPP, G 3/8 Thread Male Branch Tee Stainless Steel Push in Fitting

8 mm O.D Tubing, BSPP, G 3/8 Male Tee Branch Stainless Steel Push in Fitting

Part No. TUBE G L1 L2 L3 D1 CH2
SPB 08-G03 8mm G3/8 24mm 33mm 8mm 14.5mm 19mm
There are no reviews for this product.
Write a review
BadExcellent