BPE Union Tee | Nickel Plated Brass Push in Fitting, Push to Connect Fitting

BPE nickel plated brass push in fitting union tee is fast and simple push in design for connecting three tubes of the same diameter, with two tubes inline and one at a right angle to change the direction of flow between the tubes and provide secure connection, requires no extra sealing. Nickel plated brass push in fitting union tee is made of nickel-plated brass for durability and corrosion resistances. Union tee nickel plated brass pneumatic fittings are available in both inch and metric sizes, and can be used with a variety of tubing materials, compatible with polyethylene, polyurethane, FEP & nylon tubing, the flexible tubing is easily connected by simply inserting the tubing end into the fitting. To release the tubing, press the circular release ring and the tubing can be easily pulled out. In this category you can find metal push in fittings for hoses with diameter from 4 mm to 16 mm and 1/8" to 1/2".

Union Tee | Nickel Plated Brass Push in Fitting | Metal Fitting | Nickel Plated Brass Push to Connect Fitting
Part #: BPE Union Tee
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Push-in Tubing O.D: From 4 mm to 16 mm and 1/8" to 1/2"
Body Material: Nickel Plated Brass
Sealing: NBR
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20~150°C | -4~302°F

Products of BPE Union Tee